You can have multiple Moasure devices registered under one account and simply switch between them for measurements.

To change a Moasure device:

1. Open Settings by tapping on the cog icon in the right upper corner.

2. Tap on Account & Device Management.

3. Tap on Device under Device Management.

4. You will see a list of devices. The selected device will have a checkmark in the bottom right corner of the Moasure icon. Tap on a different device to change the selected device.

To remove a Moasure device, follow the steps below:

1. Open Settings by tapping on the cog icon in the right upper corner.

2. Tap on Account & Device Management.

3. Tap on Device Preferences under Device Management.

4. Tap on Remove Device.

5. Confirm that you want to go ahead with removing the device by tapping on Yes in the dialog that appears.

The Moasure device will generally turn off within a minute if you turn it on without starting a measurement to save your battery. You can change Moasure Device time out setting through your Settings. Below are the steps to do so:

1. Open Settings by tapping on the cog icon in the right upper corner

2. Tap on Measuring Options

3. Tap on Moasure Device Disonnection and change it to your desired value. You can select the following values: one Minute, two minutes and five Minutes.

You can have multiple Moasure devices registered under one account and simply switch between them for measurements.

To add a Moasure device, follow the steps below:

1. Open Settings by tapping on the cog icon in the right upper corner.

2. Tap on Account & Device Management.

3. Tap on Device under Device Management.

4. Tap on Add Device.

5. Follow the instructions on the screen to pair your device. You can learn more about paring in our Connect Moasure guide.

Moasure supports two turn-on methods. A legacy Double Tap method that requires a double-tap on the device to turn on and a new Rotate method that enables turning on the device by holding the device vertically and rotating it 180 degrees and back. Learn more about turning on the Moasure device in our guide.

To change the turn on method, follow the steps below:

1. Open Settings by tapping on the cog icon in the right upper corner.

2. Tap on Account & Device Management.

3. Tap on Device Preferences under Device Management.

4. Turn on your Moasure device. The device needs to be turned on in order to make changes. Once the device is connected, you will see the device data appear on screen.

5. Tap on your current Turn on method and change it to your preferred turn on method.