Turn Device On and Off

Learn how to turn your Moasure device on and off.

IMPORTANT The method for turning on your Moasure device depends on your device model and settings. Moasure 2 & Moasure 2 PRO: These models turn on only by rotating the device. Moasure ONE: This model supports both the double-tap and rotate-to-turn-on methods. The default setting is double-tap, but you can switch to rotate if your firmware is version v1.28 or higher.

Turn on Moasure by Rotating

With STICK: Raise your STICK vertically, and rotate it 180° back and forth until the LED indicator starts flashing blue.

Without STICK: Hold your device between your thumb and index finger, raise vertically, and rotate it 180° back and forth until the LED indicator starts flashing blue.

Raise vertically, and rotate 180° back and forth until the LED flashes blue.

Turn on Moasure by Double-Tapping (Moasure ONE Only)

With STICK: Place the STICK down on a flat, solid surface, then double-tap the top of the pointed corner of your Moasure ONE, where the LED indicator is located.

Without STICK: Place the Moasure ONE in the palm of your hand, and using the tip of your index finger, double-tap the center of the green circle to turn it on.

With STICK: double-tap the LED indicator | Without STICK: double-tap the centre of the device in the palm of your hand.

If you double-tap your Moasure ONE too fast or too slow, you may find that it doesn’t turn on; take your time and practice, adjusting the speed and force of your taps as necessary.

Double-Tap Sensitivity

If you would like to change the double-tap sensitivity of your Moasure ONE, please follow these steps:

1. From the Moasure app, go to Settings (tap the cog in the top-right corner of the app).

2. Go to Account & Device Management and tap on Select Device.

3. Tap the Information icon for your listed device.

4. Turn on your Moasure device so that your Moasure app can make a connection.

5. Tap on Double-Tap Sensitivity and choose between the following settings: Low (harder tap); Medium; High (softer tap).

Change Moasure ONE Turn-On Method

The rotate-to-turn-on feature is available on firmware versions from v1.28 upwards – if your firmware version is v1.28 or newer but your device is set to the double-tap method, you can change to the rotate method in the app by following these steps:

1. Go to Settings within the Moasure app (tap the cog in the top-right corner of the app).

2. Tap on Account & Device Management.

3. Tap on Device Preferences under Device Management

4. Tap on Firmware.

5. Turn on your Moasure device. The device needs to be turned on in order to make changes. Once the device is connected, you will see the device data appear on the app screen.

6. Tap on your current turn-on method and change it to your preferred method by toggling between the two options to suit your preference.

Update Firmware to Change Moasure ONE Turn-On Method

As the rotate-to-turn-on feature is available on firmware versions from v1.28 upwards, you will need to update your firmware version to v1.28 or newer in order to select the rotate-to-turn-on method instead of the double-tap method.

See how to do this here: Update Firmware.

Turn off Moasure

By default, your Moasure device automatically switches itself off after 30 seconds of inactivity. However, you can adjust the device's disconnection time by following these steps:

1. From within the Moasure app, go to Settings (tap the cog in the top-right corner of the app).

2. Tap on Measuring Options.

3. Scroll down until you see Moasure Device Disconnection where you will be able to set how long you would like the Moasure device to stay awake. You can choose from 30 seconds, 1 minute, 2 minutes and 5 minutes.