> For the complete documentation index, see [llms.txt](https://docs.moasure.com/en/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/start-and-finish-a-measurement.md).

# Start & Finish a Measurement

Learn how to start and finish a measurement using your Moasure device, follow the recommended measuring technique, and add labels or ignore points while measuring.

### Start a Measurement

To start a measurement, tap the **+** button in the Moasure app.

<div align="left"><figure><img src="https://3108400965-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FH1SckI7Noi5Ipj4x33R7%2Fuploads%2FZSKvSJWbALgLwDOzsOoC%2FUser%20Guide%20Phone%20GIFs%20(7).gif?alt=media&amp;token=8646d4ff-a0a0-4275-9cf0-1569faaad4df" alt="" width="188"><figcaption></figcaption></figure></div>

Select your [measurement type](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/understand-measurement-types.md), such as **Closed Shape**, to return to the measurement canvas.

The app will display **Waiting to Connect**, followed by **Check Moasure Device Is On** if your device hasn't been powered on.

[Turn on](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/your-moasure-device/turn-device-on-and-off.md) your Moasure device. The app will display **Connecting** while it establishes a connection.

Once connected, the app will display **Start Measuring**, and the device and app indicators will turn red.

Place your device at your chosen starting point, aligning its [reference point](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/your-moasure-device/reference-point.md) with the edge or position you're measuring from. Keep the device stationary until the starting point is captured.

You can then begin moving your device to capture your measurement, pausing regularly to record additional points.

{% hint style="info" %}
**Important:** For Closed Shape measurements, always start and finish at the same point. Choose an easily identifiable reference point, such as a corner or a marker placed on the ground.&#x20;
{% endhint %}

***

### How Moasure Captures Measurement Points

Moasure uses motion-based technology to capture measurements as you move.

Each time you place your device down and keep it still, a measurement point is recorded. The Moasure app connects consecutive pause points with lines, known as [**Paths**](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/understand-path-types.md), to create your measurement.

***

### Measuring Technique

**Measurement error increases with time, not distance.** The longer your Moasure device remains in motion between pause points, the more error can accumulate.

For best results, follow the recommended [technique](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/your-moasure-device/measuring-technique.md) of **Pace, Placement and Rotation**:

* **Pace:** Move at a steady, confident pace and aim to pause every 6–8 seconds.
* **Placement:** Place the device gently and firmly at each pause point, ideally while the timer bar is still green.
* **Rotation:** Rotate the device smoothly between measurement points, avoiding sudden or jerky movements.

If a section would take longer than 8 seconds to measure, add an intermediate pause point rather than trying to cover the entire distance in one movement.

Use the timer bar and audio cues to help judge when to pause. If the timer bar turns amber, place the device before it turns red.

For more guidance, see [**Master Pace**](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/your-moasure-device/measuring-technique/master-pace.md) and [**Measuring Time / Accuracy**](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/your-moasure-device/measuring-time-accuracy.md).

***

### Add Labels and Ignore Points While Measuring

You can add [labels](#add-labels-while-measuring) or [ignore](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/master-edit-tools/ignore.md) measurement points without stopping your measurement.

When your Moasure device is stationary and a pause point has been captured, the **Label** and **Ignore** options appear on the canvas.

#### Add Labels While Measuring

Labels allow you to identify specific measurement points, making it easier to reference important features when reviewing your measurement.

To add a label:

1. With the device stationary, tap **Label**.
2. Enter a name for your label.
3. Tap **Apply** to confirm, or **Cancel** to return to your measurement.

By default, the label is applied to the current pause point.

To label an earlier point, select that point before tapping **Label**.

#### Ignore Points While Measuring

The **Ignore** feature allows you to exclude a pause point from the final measurement path without stopping your measurement.

This is useful when you need to place your device down temporarily but don't want that point to form part of your measurement outline.

**Ignore the Current Pause Point**

1. With the device stationary, tap **Ignore**.
2. The solid line leading to the current point becomes dashed, indicating that the point has been marked to be ignored.
3. Continue measuring and capture your next pause point.
4. The ignored point turns grey, and the app connects the previous valid point directly to your new point, bypassing the ignored point.

**Ignore a Previous Pause Point**

You can also ignore an earlier point while measuring:

1. With the device stationary, select the previous pause point you want to ignore.
2. Tap **Ignore**.
3. The selected point turns grey and is excluded from the measurement path.

***

### Finish a Measurement

Once you've completed your measurement, tap the **red Stop button**.

Your completed measurement will appear on the canvas, where you can:

* [View](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/understand-views.md) it from different perspectives, including 2D and 3D.
* [Inspect](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/inspect-points-and-edges.md) individual measurement points and edges.
* Make [edits](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/master-edit-tools/edit-menu-video-walkthrough.md) to your measurement.
* [Save](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/save-a-measurement.md) your completed work.

{% hint style="info" %}
**Important:** Measurements are not saved automatically. Remember to save your measurement before starting another one or leaving the current measurement.
{% endhint %}

For more information, see [**Save a Measurement**](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/save-a-measurement.md).

***

### Clear Canvas

There is no dedicated **Clear Canvas** option in the Moasure app.

To replace the measurement currently displayed on the canvas, you can:

1. Tap the **+** button to start a new measurement.
2. Alternatively, open an existing saved measurement.

The current measurement will be replaced on the canvas.

**Important:** New measurements and edits to existing measurements are not saved automatically.

To save your work, tap **File → Save**.

The app will also prompt you to save unsaved changes before performing actions that could result in data loss, such as starting a new measurement or opening another saved measurement.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/start-and-finish-a-measurement.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
