> For the complete documentation index, see [llms.txt](https://docs.moasure.com/en/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/master-layers/measure-volume-as-layers.md).

# Measure Volume as Layers

Moasure supports adding [**volume as an additional layer**](/en/moasure-one-and-moasure-2-series/measure-and-edit/measure-volume-and-3d-terrain.md#measuring-volume-as-a-layer), allowing you to return to a site later and measure volume based on a previously recorded perimeter. This is especially helpful for landscaping, turfing, or excavation projects where you capture the surface first and the volume at a later time.

#### Before You Begin

* Ensure your original measurement includes a clear, straight **A–B reference edge**.
* Mark **Point A** and **Point B** with visible markers (such as flags or cones) so you can easily return to them for alignment.
* It’s also recommended to mark your **initial surface area starting point (Point C)** so you can return to the same position when capturing volume data.

#### How to Add a Volume Layer

1. Open your saved measurement, then tap the **Layers** icon.
2. Tap **Add Layer**.
3. Return to **Point A**, then walk to **Point B** to retrace the reference edge - look for the black alignment line on screen.
4. Moasure will switch to **Ignore Line** mode, letting you walk freely to your starting point inside the perimeter (mark this as **Point C**).
5. Switch the path type to **Points**, then capture elevation data using a spiral or zig‑zag pattern. Use more points for uneven or sloped surfaces.
6. Return to **Point C** to capture your final point and tap the red **stop icon** to finish the layer.

#### Viewing Volume Results

* Tap **3D Mesh view** to see volume calculations.
* Choose between:
  * **Lowest Point Plane** – uses the lowest elevation as base (great for holes and excavations).
  * **Perimeter Plane** – uses the outer edge elevation as base (ideal for stockpiles or raised areas).

#### Advanced Tools (Edit Menu)

To access more tools, tap **Edit**, then:

* [**Cut & Fill**](/en/moasure-one-and-moasure-2-series/measure-and-edit/master-edit-tools/cut-fill.md) – estimate how much material to add or remove to level the surface.
* [**Add Depth**](/en/moasure-one-and-moasure-2-series/measure-and-edit/master-edit-tools/add-depth.md) – calculate volume below the surface; perfect for planning excavations.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.moasure.com/en/moasure-one-and-moasure-2-series/measure-and-edit/master-layers/measure-volume-as-layers.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.