Connect Moasure Device

Steps to connect your Moasure device to the Moasure app.

Moasure devices connect to the Moasure app using Bluetooth. Always pair your device inside the Moasure app — pairing will not work through your phone’s Bluetooth settings.

1. Open the Moasure App

Launch the Moasure app on your phone or tablet.

If prompted, allow the app to use:

• Bluetooth

• Location (Android only) — required for Bluetooth scanning

---

2. Turn On Your Moasure Device

Moasure 2 & Moasure 2 PRO Rotate the device 180° back and forth until the LED starts flashing.

Moasure ONE Turn on using either method:

• Rotate the device (as above), or

• Double-tap the device (depending on your settings)

Your device is now ready to connect.

---

3. Connect Inside the App

In the Moasure app:

1. Tap Settings → Account & Device Management → Select Device / Add Device

2. The app will automatically search for nearby devices

3. When your device appears on the list, tap to connect

The app will confirm when the device is successfully connected.

---

4. Keep Your Device Connected

Your Moasure device will remain connected while:

• The device is powered on

• Bluetooth is enabled on your phone or tablet

• The device remains within Bluetooth range

If the connection is lost, it will automatically reconnect when back in range.

---

Troubleshooting Connection Issues

If your device does not appear during pairing:

Check Bluetooth

Ensure Bluetooth is turned on in your phone or tablet settings.

Check Permissions

Make sure the Moasure app has permission to use:

• Bluetooth

• Location (Android only)

Turn the Device On Again

Repeat the rotation (or double-tap for Moasure ONE) to ensure the device is active.

Restart the App

Close and reopen the Moasure app to restart the scan.

---

Once connected, you’re ready to begin measuring.