> For the complete documentation index, see [llms.txt](https://docs.moasure.com/en/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.moasure.com/en/moasure-lx1/your-moasure-lx1-device/moasure-lx1-accuracy.md).

# Moasure LX1 Accuracy

Understand Moasure LX1 measurement accuracy for room dimensions, individual walls and complete floor plans, with metric and imperial specifications and tips for achieving the best results.

Moasure LX1 combines motion-based measurement technology with integrated laser measurements to create accurate, scaled floor plans as you move through a property.

Measurement accuracy varies depending on the type of measurement, the distance being measured and the measuring technique used.

***

### Room Width and Length Accuracy

Moasure LX1 uses its integrated laser alongside motion sensors to measure overall room widths and lengths with a high degree of accuracy.

When using the recommended measuring technique, the following accuracy specifications apply:

**Metric**

* **Up to 10 m:** Accurate to within ±2 cm.
* **Over 10 m and up to 20 m:** Accurate to within ±3 cm.
* **Over 20 m:** Accurate to within ±0.5% of the measured distance.

**Imperial**

* **Up to 30 ft:** Accurate to within ±1 inch.
* **Over 30 ft and up to 60 ft:** Accurate to within ±1¼ inches.
* **Over 60 ft:** Accurate to within ±0.5% of the measured distance.

For room dimensions beyond 20 m (approximately 60 ft), LX1 continues measuring using its motion sensors without laser assistance.

{% hint style="info" %}
**Important:** These distances define accuracy bands. They are not limits on the size of rooms or floor plans LX1 can measure.
{% endhint %}

#### What Is an Overall Room Width or Length?

An overall room width or length is the straight-line distance between opposite sides of a room, as shown on the completed floor plan.

This is different from the length of an individual wall, door, window or other feature, which has its own accuracy specification.

Overall room dimensions benefit from LX1's integrated laser measurements, while individual walls and features are calculated using motion sensor data and the geometry of the room.

***

### Individual Wall, Door and Window Accuracy

Individual walls, doors and windows are calculated using LX1's motion sensors and the geometry of the room.

Unlike overall room widths and lengths, which benefit from direct laser measurements, these features have their own accuracy specification.

**Metric:** ±1% of the measured length, plus 1 cm.

**Imperial:** ±1% of the measured length, plus 7/16 inch.

For example:

* A **3 m wall** is accurate to within approximately **±4 cm**.
* A **10 ft wall** is accurate to within approximately **±1¾ inches**.

The expected variation increases with the length of the wall or feature being measured.

***

### Overall Floor Plan Accuracy

When measuring a complete multi-room floor plan, the accuracy of its overall width or length depends on the total distance measured.

**Overall floor plan width or length accuracy: ±0.75% of the measured distance.**

For example:

| **Overall dimension** | **Expected variation** |
| --------------------- | ---------------------- |
| 15.24 m (50 ft)       | ±11.4 cm (4½ in)       |
| 46.94 m (154 ft)      | ±34.9 cm (13¾ in)      |
| 59.74 m (196 ft)      | ±45.1 cm (17¾ in)      |

These figures relate to the overall dimensions of a completed floor plan, rather than the accuracy of individual walls, doors or windows.

Small differences between individual measurements can accumulate across a multi-room floor plan, which is why overall floor-plan accuracy is specified separately from individual room dimensions.

***

### How to Achieve the Best Accuracy

Following the recommended measuring technique is essential for achieving accurate results.

1. **Choose a suitable wall position.** Place LX1 against a clear, flat section of wall. Where practical, aim for a position towards the middle of the wall, but this isn't essential. Any suitable flat section can be used, allowing you to work around furniture, radiators and other obstructions.
2. **Avoid measuring into corners.** LX1 calculates corners automatically from the measured wall planes, so there's no need to place the device directly into corners.
3. **Keep the device still during placement.** Hold LX1 firmly and steadily against the wall until the green LED confirms the point has been captured.
4. **Move smoothly between placements.** Maintain a steady, controlled pace, avoiding sudden movements or rotations. Aim to keep the timer bar green.
5. **Allow a clear laser view where possible.** Where practical, choose placement positions that allow the laser to measure across to the opposite wall, ideally at least once across the room's length and once across its width.
6. **Capture additional points on uneven walls.** Where a wall is uneven, capturing several points along its surface helps LX1 establish the wall's direction accurately. On longer walls, spreading capture points along the wall can also help establish its direction.
7. **Review your completed floor plan.** Check the final measurements before leaving the property.

For more guidance, see [Moasure LX1 Technique](https://docs.moasure.com/en/moasure-lx1/your-moasure-lx1-device/moasure-lx1-technique.md).

***

### Explore LX1 Accuracy

If you want to understand how accuracy changes over different measurement distances, use our interactive [**Moasure LX1 Accuracy Calculator**](https://www.moasure.com/products/moasure-lx1#lx1-accuracy) to explore expected measurement variation for:

* **Room Width:** Overall room width or length.
* **Single Wall:** Individual wall length.
* **Whole Plan:** Overall width or length of a complete floor plan.

The calculator provides practical examples to help you understand the expected accuracy for your project.

***

### Is Moasure LX1 Right for Your Project?

Moasure LX1 is designed for creating floor plans, calculating areas and planning property layouts.

It is suitable for applications such as property surveys, renovation planning, flooring estimates and general space planning.

However, LX1 is not recommended for fabrication, structural work or applications requiring critical dimensional tolerances. For these purposes, final dimensions should be verified using an appropriate precision measuring tool.

{% hint style="info" %}
*Accuracy figures assume suitable measuring conditions, including clear access to the walls being measured, a flat and stable surface for device placement, and use of the recommended measuring technique. Actual measurement results may vary.*
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.moasure.com/en/moasure-lx1/your-moasure-lx1-device/moasure-lx1-accuracy.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
