Charging Moasure

Learn how to charge your Moasure device, understand battery status, and keep it ready for accurate measurements.

Moasure 2 and Moasure 2 Pro use USB Type-C cable

Moasure ONE uses a Micro USB cable

How to Charge Moasure

Connect your Moasure device to a power source using the included USB cable. While charging, the LED indicator will flash.

A full charge takes approximately 2–3 hours. When fully charged, the LED turns solid green.

Learn about LED indicators when charging

Battery Life

Moasure devices use rechargeable batteries designed to support a full day of measuring.

Typical usage per full charge:

• Moasure 2 PRO: up to 10 hours

• Moasure 2: up to 5 hours

• Moasure ONE: up to 5 hours

For best performance, fully charge your device before use.

Check Battery Level

The battery level is shown in the top-right corner of the app during a measurement.

The battery icon appears in the top-right corner after starting a measurement.

USB Cable Requirements

Moasure 2 and Moasure 2 Pro

• Cable: USB Type-C

• Charger: Use a standard USB Type-C charger

Moasure ONE

• Cable: Micro USB

• Charger: Use the supplied cable where possible

If using an alternative charger, ensure it is:

• 5V output

• Minimum 500mA current

Additional guidance:

• Higher current chargers will not improve performance

• Chargers above 5V (e.g. 9V or 12V) may damage the device

• Chargers below 5V will not charge the device

---

When the battery is low, the Moasure app will notify you.

Always use the correct cable and charger to protect your device and ensure reliable performance.